M5 Screw/Nutdriver (and bigger metric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screwdriver for M5 screw/nuts, scale it up for bigger sizes. Optimized to be very slim and sturdy. No supports necessary
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 43
- Makes
- 1
- Views
- 216
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I made it for being able to screw a M5 nut, which had only a small space for screwing (nut was nearly embedded in the destined place). The screwdriver is hollow so that the screw doesn't get in the way. Scale it up for bigger sizes (smaller won't work, since it is really thin).
Print it upside down (upside down T shape)! Not suitable for nozzles bigger than 0.4mm, the Layer height can be chosen freely (I have printed it with 0.15mm). If you can live with small distortions on the arms, you can print it without supports. Brim is heavily recommended.