MMX - with printable holes and other quick fixes (SeleadLabs kit 2026 remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed parts - added printable holes, quick-fixed some parts according SeleadLabs kit bought in 2/2026
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 248
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Just a quick remix - added printable holes to a few parts - print as oriented in attached files. Use all other print settings from original models.
Fixed some parts alignment
EDIT: 27.02.2026 - gatespacer bearing embedding made better printable
EDIT: 08.05.2026 - added shaft with 19 teeth, less supports and zero position (67° angles between actuators), for 19T shaft, you shloud also use (for proper belt tension):
M3x16 screw with 4mm/3mm PTFE tube screwed into spare (non-used) heat insert - orange mark on photo
"mmx-right-side-cover-spacer-for-19T-shaft" for screw holding side panel (to not interfere with belt) - red mark on photo. Screw holding side cover spacer is for photo only, it should go through side cover also!
With 19T shaft, the servo angles are:
0 - release angle
45 - lane 0
90 - lane 1
135 - lane 2
180 - lane 3