MMX - with printable holes and other quick fixes (SeleadLabs kit 2026 remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed parts - added printable holes, quick-fixed some parts according SeleadLabs kit bought in 2/2026
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 50
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Just a quick remix - added printable holes to a few parts - print as oriented in attached files. Use all other print settings from original models.
Fixed some parts alignment
EDIT: 27.02.2026 - gatespacer bearing embedding made better printable
EDIT: 08.05.2026 - added shaft with 19 teeth, less supports and zero position (67° angles between actuators), for 19T shaft, you shloud also use (for proper belt tension):
M3x16 screw with 4mm/3mm PTFE tube screwed into spare (non-used) heat insert - orange mark on photo
"mmx-right-side-cover-spacer-for-19T-shaft" for screw holding side panel (to not interfere with belt) - red mark on photo. Screw holding side cover spacer is for photo only, it should go through side cover also!
With 19T shaft, the servo angles are:
0 - release angle
45 - lane 0
90 - lane 1
135 - lane 2
180 - lane 3