255 models
Chess Dubrovnik Set - mod easy to print Kingsize 4.96" (for a board with 70mmx70mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
Print approx. €16.34–€19.97 excl. taxPreliminary estimate for PETGSource material: PET
The Japanese Martian Moons eXploration (MMX) mission is scheduled to launch during summer 2024. In addition to its science payload (including a sample return system!) it will bring to the surface of Mars’ moon Phobos a small rover…
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Another iteration on already stellar designs, just some small tweaks to embed the 6x2mm round magnets into the print with a pause at layer 17 to place the magnets when printing.
Print approx. €2.96–€3.61 excl. taxPreliminary estimate for one variant
I've done it, everyone! I've reinvented the wheel! But seriously, this is just a simple model with a straight-forward design that seems to work well for my purposes, even if it's something I could have downloaded from dozens of…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for PETGSource material: PET
In case this seems familiar to you, that's because I recently had posted a model for this same exact mount. I deleted that model though because upon building my Core One, I found that cable connector was too long for the mount and I…
Print approx. €0.52–€0.64 excl. taxPreliminary estimate for PETGSource material: PET
Have fun use it as a mobile snardrum!: reward 100€: who knows this melody and rythm played around 1974 in the german radio (instrumental!) Short Video about mountig prozedure fixing 2 tubes together and start playing!…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for PETGSource material: PET
Adds around 25mm to the height of your couch to allow a Roomba to fit under it. Pla will deform over time. petg/abs
Print approx. €4.88–€5.97 excl. taxPreliminary estimate for PETGSource material: PET
Verbinder für Aluminium-Profil. Bei mir in einem Fliegengitter-Rahmen verbaut.
Print approx. €0.74–€0.90 excl. taxPreliminary estimate for PETGSource material: PET
modification pour mettre une bague de roulement en laiton
Print approx. €1.05–€1.28 excl. taxPreliminary estimate for one variant
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
Two concentric squares to check if your buildplate is level or warped. Fast to print. Use this test print to check if your printbed is level and adjust your first layer height. The outer square is 150mmx150mm. Make sure to take a look at…
Chess Dubrovnik Set - mod easy to print Kingsize 3.86" (for a board with 58mmx58mm fieldsize) Chess #Dubrovnik #Staunton /////////////////////////////////////////////////////////////////////////////// The set - except of the knight - is a…
Beyerdynamic Hinge Slider Replacement/Upgrade for DT770 Pro, DT770 M, DT990 Pro, DT990, DT880, Custom One Pro Plus, TYGR 300 R and MMX300 MK2
This adds 3x holes for 6mmx2mm round magnets into dancan13f's Prusa Core One Dust Protector parts. Update 6/16/25 Added the rear dust cover and made press and embed --Press: Tight fitting holes to press magnets into after printing…
IMPORTANT 2024-06-27: I reconized an Error with the Upper and lower Wall: It is not straight! I will fix it ! You can print both files in a large printer flat, but do not rotate them on the front Side! Updated 2024-02-07 see below! Safe…
I really like CSD_Salzburg's Skadis designs but these containers just take too long to print. So I adapted a vase printing idea to be used with the IKEA Skadis containers and added a little twist. I also added a little feature trick to…
Chess Dubrovnik Set - mod easy-print Kingsize 3.75" (FIDE) (for a board with 2x2 inch / 50mmx50mm fieldsize) Chess #Dubrovnik #Staunton //////////////////////////////////////////////////////////////////////////////// The set - except of…
The original model was the right width and depth I needed since my Bambu doesn't have that much room behind it from the wall. This remix model gives it a bit more height and uses pressed in magnets. no glue on the magnets. just some elbow…
76mmx583R Shell (17-pdr) This Shell was used in the M4 Sherman “Easy 8” and Firefly Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re…
75mmx350R Shell This Shell was used in the M4 Sherman Tank. It’s not 100% accurate but I think it’s pretty close. It's not meant to be a historically accurate replica, just close. I thought that if you’re going to have a German 88mm (…
Customized version of https://www.thingiverse.com/thing:2187167 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2187167 Instructions Using the following options: enable_male_leaf = 1 enable_female_leaf =…
After taking the step of buying matching white label spice bottles I was faced with making a decision as to how I'd store them. Storing them in the box they came in helped kick the can down the road long enough for me to become incredibly…
A small enclosure for a Wemos D1 Mini mounted on a 40 mm x 60 mm perf board. There are two screw holes to secure the board and a cabling egress on one side for screw terminals. I created the design in Fusion 360 and have included the file…
It's a magnet I designed for Teacher Appreciation. It uses different depths to achieve the colors, instead of multi color printing. I manually add pauses and change the filament. Needs 2 12mmx2mm (actual size is 12mmx1.8ish) First Layer…
Perfect for bed leveling nylon lock mod ~ 6mm MK3s+ bed spacer. Used for nylon nut tesion and set initial height to Prusa spacer's 6mm.
Remix of Radiomaster RX-RP1 Receiver V7 Case Mount 20mmx20mm
Heavy duty hinge with 3mmx65mm nail
0,2 layer height 5 wall 4 bottom 4top layers
I bought the HEPA filter linked in the original BentoBox filter comment section from Amazon. about 42mm x 83mm. Remixed the filter container to fit it exactly. also reduced over all height. works with the original cover. I have not…
Flet selica gel container to hold around 50-100g of the selica gel. Can be used for warderob shelfs to keep clothes fresh. Or in the car to keep windows dry when cold. Or where ever it needed. Flet form factor allows more selica beads…
I have adapted the model so that you can use M3 inserts for the screw connection. I used 6x20x2mm magnets and made corre
Holder Stand for Refillable dye pens for IVAN 15mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
I ordered these track lights from Aliexpress as a kit, sadly they didn't come with endcaps so I designed some up. One is just for closing off the end, the other has a hole for wiring. This is the kit I ordered:…
to store mini stuff under the desk and free up some space on it
simple mount to attach the starlink mini to a 40mmx40mmx crossbar for a roof rack additional adapter for when parked you can adjust the alignment of the starlink. Thumb knobs for m6 allen bolt hardware. Item has been updated check it out…
adapters for bigger earpads 90mm
Simple model made in tinkercad, can be resized with some trail and error. Made so i can play some 9th age with me bois after 40k got too anoying. I printed it with some crappy PLA and 0,3mm layer hight, wouldn't invest any more in it.
Sorting tray with funnel at corner to easily return small items to container. Nothing too fancy, here. Main area is about 100mm by 60mm, and pour spout is 30mm wide by 20mm long. Spout has ramp at front to facilitate sweeping objects into…
Holder Stand for Refillable dye pens for IVAN 10mm dye pens for leathercraft , Holds 6 pc, full size 120mm x 80mm
easy to print , no supports, printed in black elegoo rapid pla window is in petg clear ironing mode on for clarity.
A tiny model but an effective solution to assist children in threading standard size plastic pony beads (6mm x 9mm) onto thin string and to prevent them from slipping off the "working" end. If you have children that like to do beading you…
Lid made for a 92mm fan, specifically NF-A9x14, for the BTT M5p box that @Raziel_163191 designed This was request from one of my patrons Haven't tested it, but I made two models, one with the original thickness, and a second with a 5mm…
This isn't a remix, though I did see the same idea from multiple other users on Printables (whose names that I don't recall) and decided to make my own since the ones I saw were flat-topped instead of tapered or rounded. Now that I've…
I wanted to run a power cord flat against the wall & baseboard. I already enjoyed CodeCreations Corner Cable Clip and thought a little remix would work for my purpose. This will fit a cord that is 4mm thick and 7mm wide.
a simple Holder for the CN3D MMX for 2020 Profiles like those on the Ender 3. It uses the original mounting points of the MMX and is mounted to the profile with M3 or M4 Extrusion Mounts.
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: thread_step = 1.5 resolution = 0.5…
designed for a 175mm by 53 mm lifepo4 cell Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 200 Infill: 38 Filament: generic PETG transparent orange Category: Electronics
Mixer mit M6 Gewinde 55mmx40mm Die Flüssigkeit wird beim Mixen nach unten gezogen so das weniger Spritzer entstehen. ------------------ Mixer with M6 thread 55mmx40mm The liquid is pulled down during mixing, resulting in fewer…
armazón para lámpara con tira led salón techo, con unión( L) stl, tubo aluminio 1000mmx10mmx10mm y soportes a techo
Made for 24"x 24" x24" enclosure kit I bought of of Esty. intended to use 3 M5s per corner. holes are offset to make assembly easier.
Mount can be clipped between two 16mm rods. If needed, use zip-ties to secure it. In my case, i don't need any zip ties for holding 2 x Arctic P14 FANs…. The clip it designed to be used with standard 15mm X 15mm aluminum profiles Parts…
I use a "BIQU CryoGrip Pro Glacier 356x356mm Panda Build Plate for Voron 350" with my prusa xl. To better support in prusa-slicer go to printers tab General section Bed shape click set load xl.svg (comes from the prusa-slicer project and…
Check out the .3mf file for my preferred settings, especially for supports. Best to be printed in a material that doesn't creep, ABS is a good option. The supports can be removed by pushing an exacto knife in from the end on each side of…
Revision of Jude's magnetic poster hangers, to fit the kind of magnets i was able to get my hands on.
Just a circular saw edge guide. I made it as long as I could. So, cut it to fit your printer. It'll fit any 350mm² bed.
Got tired of getting sawdust on my stones. Designed to fit a set of diamond stones that are 8x3x0.3", or 205x80x8mm. I also have a strop the same size that I glued onto a piece of 3/8" ply, so the top slot is slightly taller (14mm). It…
Argb Lichtröhren Halfter 31 mmx 23mm
I had a u-profile sized 20x10mm at home, so i designed an adapter for it.
I got some liquid bottles that are 28mm in diameter and 91mm in height, I wanted to store them together and a way, I put this box together. I made two versions of it 4x Liquid Bottle 16x Liquid Bottle (shown in the pictures)
=== English version below the French description === Description (French version) Ce modèle représente le rover IDEFIX® de la mission MMX (Martian Moons eXploration), un petit robot franco-allemand d'environ 25 kg, de la taille d'une…
There are many caster tools out there for the Awesomatic a800mmx/fx but none of them are compatible with the hudy setup v1, the original hudy setup tool. Because they are in front of the setup tool, while for the original hudy setup, they…
Mission: I was given the task of designing a solution for a math teacher who had requested a model of the conic sections to help her students deepen their understanding of the topics they were learning about. I included 3 conic sections…
One Version for my OBR and one wihtout the skull. I printed it with PETG 100%. I wanted it a littele bit heavy.
if you want it without the logo dm me ;)
MMU PTFE Magnetic connection for an enclosure, quick connect/disconnect. This is for a different size magnet: 8mm x 1.75 I remixed it because I had a bunch of these magnets. I also created a "clamp" which you can slide over the connection…
One Version for my OBR and one wihtout the skull. I printed it with PETG 100%. I wanted it a littele bit heavy.
I couldn't wait for the new X-Controller to come out so I made a laser cut case for my X-Carve electronics and I added a lot of the options to the base. The relay is internal and has two plugs with separate switches which allows each one…
My very first model design (Feel free to remix or enhance it!) I recently bought my very first 3D Printer (AnkerMake M5C) and since it has only 1 Filament, it is easier to print single-colored models. I wanted a Dirty/Clean Magnet for my…
Hier stelle ich ein Filtergehäuse für einen Aktivkohlefilter für den Elegoo Centauri Carbon zur Verfügung. Der Aktivkohlefilter hat die Maße: 115mm x 115mm x 20mm. Das Gehäuse habe ich 1mm größer konstruiert. Der Link für den Filter ist…
Support de caméra T-Rex Foxeer qui remplace les entretoises en montage de 20mm. Attention Ce n'est pas du standard, c'est +2mm de hauteur. Je l'ai réalisé pour pouvoir monter une caméra T-Rex Foxeer sur une Frame Lightswitch Pro Light 2.
🚀 MMX OG — Serial Number Registration Now Open! We’re officially opening serial number requests for the MMX OG (4-Color) Multi-Material Extruder . If you’ve built one and made it work — this is your moment to make it official. 🔩🔥 Each…
made the face convex and added a backer to the center hole, i also recessed the center hole to fit a hueforge done by Don Matis “jack skellington” here on printables https://www.printables.com/model/604843-jack-skellington
Proven working: PLA 0,15 structural Snug supports everywhere (organics do work but are a pain to clean up) Remember to remove supports on the inside
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
Keychain heart puzzle pieces that come together. You can have both heart pieces on 1 keychain loop, or separated to give one to your significant other or friend. Print one half at a time, or together. It uses different depths to achieve…
Just a circular saw edge guide. I made it as long as I could. So, cut it to fit your printer. It'll fit any 350mm² bed.
MMU PTFE Magnetic connection for an enclosure, quick connect/disconnect. This is for a different size magnet: 8mm x 1.75 I remixed it because I had a bunch of these magnets. I also created a "clamp" which you can slide over the connection…
The picture shows the revised pulley on the left and the original on the right. Use same settings as original MMX servo pulley.
Includes a version with an extra retaining bracket, as well as a basic version, where the surge protector slides into place and is held there with integrated retainers in the structure
Simple organizer insert with dimensions of 50mmx100mm or 2"x4". I downloaded EB Garamond which looks particularly nice in bi-color. I added a layer change about half-way up (see attached GCode) and put some of the common organizer labels…
This is a mount for 8 channels (137mm x 50mm) relay (holes at 44.7mm x 131.5mm). Supposed to be used with 2 clips from https://www.printables.com/fr/model/303480-din-rail-raspberry-pi-34-holder M2x16mm screws required. Printed with…
This is a box for a LM2596 converter whose board measures 48mm X 23mm. A quick way to tell if this one will work for you is if by the output positive there are 4 pads arranged in a square. I made this after I realized that not all…
Sewing guide to sew straight lines with a hole for a magnet with 18mm radius and 5mm thick I added the fusion 360 file and you can go back in history and change the size of the hole sketch and how much you pull (for the magnet depth)
BN-880 GPS mount for my Eachine Cvatar. Very light weight. Printing in TPU is preferred, but PETG also works well on this design. PLA might also work, but I have not tried. Supports are needed due to the central overhang. Hole Spacing for…
Awesomatix body Stopper. Made for A800R but fits also MMX and others. Distance between holes is 28mm
magnetic mount / holder for the ltt screwdriver requires 2 20mmx5mm magnets and some super glue tested on pla with support for the holes. probably works for any solid filament
Since the hardware strores in Austria are closed due to the pandemic, In designed a printable for 4mm screws. Print Settings Printer: CTC Bizer Rafts: Doesn't Matter **Supports:** No Resolution: 0.2 **Infill:** 100% Filament: other PETG…
Securely position your Logitech G560 speakers on your racing sim rig. Each shelf cradles the shape of the speaker and locates with recessed slots for the respective rubber feet. The STL provided is for the RIGHT shelf. Simply mirror the…
Increased the hole diameters of the remixed model to accommodate 10mm x 2.5mm magnets. Printed in Bambu ABS with painted supports.
Modified the text to be embossed
2025 Roman Numeral MMXXV Sunglasses, Pendant, and Key chain designs. Printed @ .3 mm with 2 colors Sunglasses can be printed with 2 or 3 colors. Happy New Year!
If you have a HSW mounted with magnets and it is sliding adding a two rubber feet might be enough. Your HSW will still be removable without wasting powerstrips or something similar. Before that I tried 8 magnets mountes but it kept…
For making a saw horse from 24x48mm boards. I included a small tolerance test file to print out and make sure the scale will work with your boards.
Unistrut hurts when you walk into it, in high traffic area a wider end-cap makes sense. Often unistrut is not perfectly cut/de-burred, so in this design that part that goes into the channel is tapered. Recommend printing in TPU with a…
This is a stackable Lego container that displays the Legos in the front with a closing lid. The dimensions of the container are 100mm Wide x 100mm Long x 50-100mm High. The lid is only 5mm tall so its pretty compact. A full print uses 25m…
With this thing you can rapair your broken protective rubber sleeve on the Beyerdynamic MMX 300 headset cable. You have to print the part twice. To open the earpiece you hav to do a few easy steps. Remove the earpiece cushion, than you…
Hook Adapter for a wide hanger that has spring wire clip clothes pin. 6mm stud x ~50mm hanger - see pics for real life application! They work great so I can hook my hat on them quickly instead of having to reach up and spread the wire…
![Chess Figure Set Dubrovnik [GIANT - Kingsize 4.96"] - mod easy-to-print [for a board with 70mmx70mm fieldsize]](https://media.printables.com/media/prints/214927/images/1964582_f2626a6b-a6d4-47c0-bf33-d747f950b9fc/2022-05-27-20_52_51-window.jpg)
![Chess Figure Set Dubrovnik [Kingsize 3.86"] - mod easy-to-print [for a board with 58mmx58mm fieldsize]](https://media.printables.com/media/prints/214964/images/1964918_1f7f8524-10d4-47f4-a17c-7be02bcff904/2022-05-27-20_52_51-window.jpg)
![Chess Figure Set Dubrovnik [FIDE-Kingsize 3.75"] - mod easy-to-print [for a board with 2x2 inch / 50mmx50mm fieldsize]](https://media.printables.com/media/prints/214978/images/1965082_cc5a580a-e284-46ab-90c4-bd1b3406c6e9/2022-05-27-20_52_51-window.jpg)
