1 / 3
HSW mounting inset 10x2mm (i.a. for Ikea 10mmx3mm rubber feet)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use the Ikea 10x3mm rubber feed to stop your magnet mounted HSW from sliding.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
If you have a HSW mounted with magnets and it is sliding adding a two rubber feet might be enough.
Your HSW will still be removable without wasting powerstrips or something similar.
Before that I tried 8 magnets mountes but it kept sliding when I put my caliper back.
I had some spare Ikea door stopper rubber feet (round 10x3mm) so I tried if it would prevent sliding and it worked surprisingly well with only 6 magnets.
Printed with
- PETG
- 0.4mm nozzle
- 0.2mm layer height (speed profile)
- without supports and brim