1 / 3
HSW mounting inset 10x2mm (i.a. for Ikea 10mmx3mm rubber feet) — zdjęcie 1
1 / 3

HSW mounting inset 10x2mm (i.a. for Ikea 10mmx3mm rubber feet)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use the Ikea 10x3mm rubber feed to stop your magnet mounted HSW from sliding.

Ocena
0 / 5
Polubienia
2
Pobrania
7
Wydruki
0
Wyświetlenia
110
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution — Noncommercial

If you have a HSW mounted with magnets and it is sliding adding a two rubber feet might be enough. 

Your HSW will still be removable without wasting powerstrips or something similar.

Before that I tried 8 magnets mountes but it kept sliding when I put my caliper back.

I had some spare Ikea door stopper rubber feet (round 10x3mm) so I tried if it would prevent sliding and it worked surprisingly well with only 6 magnets. 

Printed with 

  • PETG
  • 0.4mm nozzle
  • 0.2mm layer height (speed profile)
  • without supports and brim

Tagi