1 / 8
RST135 Hand Controller Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The hand controller holder is made in two parts. Part A to hold the hand controller, Part B to attach to the tripod leg. My tripod leg has a diameter of 40mm. If you have a different diameter leg, then you will need to design Part B yourself.
The hand controller was scanned using an SLS scanner and the outline reverse engineered.
I printed in PETG with a layer height of 3mm then glued with epoxy.
The hand controller mount Part A has a thickness of 1.5mm so will need to print with above 50% infill for strength.
No need to generate any supports