RST135 Hand Controller Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
RST135 hand controller holder designed in two parts allowing the hand controller to mount to a tripod leg.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 55
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The hand controller holder is made in two parts. Part A to hold the hand controller, Part B to attach to the tripod leg. My tripod leg has a diameter of 40mm. If you have a different diameter leg, then you will need to design Part B yourself.
The hand controller was scanned using an SLS scanner and the outline reverse engineered.
I printed in PETG with a layer height of 3mm then glued with epoxy.
The hand controller mount Part A has a thickness of 1.5mm so will need to print with above 50% infill for strength.
No need to generate any supports