Holder for phone and DJI Osmo pocket 3 camera
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
when you want a bigger screen and holding two devices for a long time is tiring
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
You'll need two screws (20mm long) and two M5 nuts. One is a 1/4-inch screw, the extension rod from the camera kit with a 1/4-inch thread, and a tripod with a 1/4-inch thread.
Rubber bands are required for operation; we attach them using the hooks. Adjust the number, thickness, and tension to your preference.
After assembling the rubber bands, it's best to glue the holder to the guide rail. The second gluing is for the base and guide rails. You can use M3 nuts and screws embedded in plastic, but I had a little trouble.
The model is in the testing phase, if anyone has any suggestions, I am waiting for messages