1 / 5
Holder for phone and DJI Osmo pocket 3 camera — image 1
1 / 5

Holder for phone and DJI Osmo pocket 3 camera

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

when you want a bigger screen and holding two devices for a long time is tiring

Rating
0 / 5
Likes
4
Downloads
35
Makes
0
Views
368
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

You'll need two screws (20mm long) and two M5 nuts. One is a 1/4-inch screw, the extension rod from the camera kit with a 1/4-inch thread, and a tripod with a 1/4-inch thread.

Rubber bands are required for operation; we attach them using the hooks. Adjust the number, thickness, and tension to your preference.

After assembling the rubber bands, it's best to glue the holder to the guide rail. The second gluing is for the base and guide rails. You can use M3 nuts and screws embedded in plastic, but I had a little trouble.

The model is in the testing phase, if anyone has any suggestions, I am waiting for messages