Boompole Holder for SCHLEPP ONE Camera Cart
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable base part of Boompole Holder for SCHLEPP ONE Camera Cart. QuickFist Original required for full functionality.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This printable boompole holder for SCHLEPP ONE Camera Cart consists of two key parts:
printable base part (free for download)
(widely available) QuickFist Original Clamp (not for printing)
We are NOT associated to the manufacturer of QuickFist Clamp. We do NOT provide printable files of QuickFist Clamp. We highly respect intellectual property.
Please see instructions in PDF for assembling your SCHLEPP ONE Boompole Holder.
Required Parts:
QuickFist Original Clamp (widely available), 25-57mm diameter, ca. 20-25 €, Set of 2
Electric Drill, 10mm drill bit
1x M10 x 25 Screw + M10 Nut or Wing Nut
2x Nylon Washers (for M10 screws)
3D printable SCHLEPP Boompole Holder, 60mm inner diameter
2x M6x18mm Screws + 2x M6 (Square) Nuts - regular nuts are fine, too)
2x Nylon Washers (for M6 screws)
Orientation: Print flat.
We assume no liability for the stability and functionality, as the stability of the part is highly dependent on your print quality and how it is used.