1 / 4
VORON 2.4 Rear Umbilical PUG and XY Endstop PCB Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fitting for an umbilical gland and a typical 3D printer endstop PCB.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
Print using the recommended Voron settings: Sourcing Information | Print Settings.
Find the bumper to be mounted on the X Axis here.
Use M3×5×4 threaded inserts as provided with standard Voron 2 kits.
Min. required: 2 for the PUG mount
Recommended: 4 for the PUG mount
Optional: I added 5 slots for threaded inserts on top for mounting additional gear. It could be a good spot for a camera or a chamber thermistor.
