1 / 3
Drone Eyes for BetaFPV Air75 — zdjęcie 1
1 / 3

Drone Eyes for BetaFPV Air75

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

For some reason my wife kept saying my drone reminds her of a sentient creature so I just had to add some eyes to it!

Ocena
0 / 5
Polubienia
4
Pobrania
9
Wydruki
0
Wyświetlenia
293
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

I couldn't help but add some eyeballs to my BetaFPV Air75. Watching a drone fly around really makes you think it has a life of its own, and adding eyes gives it a personality. This is a very simple model that absolutely destroys the flight dynamics  with the added weight and awful aerodynamics (its basically a sail). However just think of the smiles you will get flying this thing around! You can swap out the eyes to make it sad/angry.

I designed this to fit the Air75 frame and it seems to work with the new Air75 II as well. I'm using 2mm kit for standoff screws/nut but you could easily swap this out with something different. My original version used 3d printed threads, but this didn't hold very well. Now that I actually sit and think about it, this would probably work better if I screwed in from the underside.... I'll make another version at some point. 

The eyes are concave to give it the illusion that it is constantly looking at you regardless of the angle. I just painted the pupil but if you have a multi-material capable printer, you could modify this to print the color directly. 

I had a bunch of screws from this kit https://www.amazon.com/Litorange-320PCS-Standoff-Assorted-Assortment/dp/B07D78PFQL/ref=sr_1_4

Now it just needs a name... Whoopee?

Print directions: 

Print the eyes upside down with organic supports. Infill and layers/perimeters don't matter since it is quite thin (and probably would be best to keep it light)

Tagi