Small Planter Mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reusable planter mold
- Ocena
- 5 / 5
- Polubienia
- 80
- Pobrania
- 215
- Wydruki
- 1
- Wyświetlenia
- 1142
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 5 part planter mold. It can be reused, so far I have made 3 with the same mold.
You can use concrete, plaster, or anything else.
How to use:
Step 1: Print the 5 parts
It works well with 0.2 layer height, but you will get better results with 0.15 layer height.
The only part that needs supports is the middle part.
Step 2: Sanding and Greacing
Sand the middle part until smooth. Then apply grease or oil to all the parts with a brush.
It will make unmolding essayer.
Step 3: Assembly
Assemble the 5 parts and apply hot glue or tape to the edges to seal the mold
Step 4:
Pour your concrete or plaster mix in the mold
Step 5: unmold
Wait until it is fully cured, remove the glue or tape, then open the mold
Varnish or paint before use to protect from water.