Small Planter Mold
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Reusable planter mold
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 215
- Makes
- 1
- Views
- 1,142
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 5 part planter mold. It can be reused, so far I have made 3 with the same mold.
You can use concrete, plaster, or anything else.
How to use:
Step 1: Print the 5 parts
It works well with 0.2 layer height, but you will get better results with 0.15 layer height.
The only part that needs supports is the middle part.
Step 2: Sanding and Greacing
Sand the middle part until smooth. Then apply grease or oil to all the parts with a brush.
It will make unmolding essayer.
Step 3: Assembly
Assemble the 5 parts and apply hot glue or tape to the edges to seal the mold
Step 4:
Pour your concrete or plaster mix in the mold
Step 5: unmold
Wait until it is fully cured, remove the glue or tape, then open the mold
Varnish or paint before use to protect from water.