Keyless Toy Handcuffs – Fully Printable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toy handcuffs that are fully printable and need no extra parts
- Ocena
- 4,4 / 5
- Polubienia
- 65
- Pobrania
- 315
- Wydruki
- 3
- Wyświetlenia
- 2249
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
I used the handcuff ratchet system as a clamp for another project but then went on to re-purpose the design into this toy handcuff design. That’s why it's keyless and better as a toy. I’m not sure they could restrain anyone for long, which is probably a good thing.
Even though they are keyless, there is an alternative shorter lever STL that is recessed and needs something small (the key) poked in to release the mechanism. So you could make a version that needs a key or rather a tool to open them.
This is fully printable, so you don’t need to find any additional hardware like screws or use glue.
You can print all the parts in one go with a suitable sized print bed, but I recommend printing the chains separately using a brim. The chains also prints more reliably using a low resolution 0.2 - 0.3mm.