Liczymy pasujące modele…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
Lots of great binder models online, but I wanted one with: No magnets Using soft TPU as a printable insert to press against your wrists The only thing you need is 10x 20mm m3 screws (you could get away with less, hypothetically 2 plus…
Soft handcuffs made from TPU. Printed in one piece, yet flexible and softly bendable. The complete print already includes the chain between the handcuffs. They are only fastened with snaps, but still hold quite firmly. The chain is…
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…
The fingercuffs by LoboCNC were almost a perfect fit for the gi joe action figures my stepson has, but I had to modify these to fit the figure. The only reason I'm uploading it like this is it was VERY difficult for me to find these…
Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…
Hello, Welcome to my profile, full of models and miniatures :-) I have Handcuffs for you. They work absolutely great and are in the size for both adult and child hands. The mechanism works well, the handle is nice and easy to open. It…
This is printed with 3DJake TPU 95A and a .4 mm nozzle on the Prusa MINI.
The remix version of the realistic handcuffs doesn't have a key, so I made one.
I like @LayeredRestraints 's Irish handcuffs, however, the glue in spacer used to keep the locking arm attached to the cuffs introduced a new problem for me. When removing the cuffs in a hurry, it became possible to effectively latch them…
I was looking at the hinge and decided to redo it - move the slope closer to the end and make it print in place ... Just use supports and it is as good. I made 2 test prints ... I will probably do one more variation later ... but this is…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
I used the handcuff ratchet system as a clamp for another project but then went on to re-purpose the design into this toy handcuff design. That’s why it's keyless and better as a toy. I’m not sure they could restrain anyone for long,…
Lots of great binder models online, but I wanted one with: No magnets Using soft TPU as a printable insert to press against your wrists The only thing you need is 10x 20mm m3 screws (you could get away with less, hypothetically 2 plus…
Soft handcuffs made from TPU. Printed in one piece, yet flexible and softly bendable. The complete print already includes the chain between the handcuffs. They are only fastened with snaps, but still hold quite firmly. The chain is…
English version This is a remix of Printcuff's irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the large model, with strands loop height around 7.5 cm. Check the medium (…
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the medium model, with strands loop height around 6.5 cm . Check the large (…
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the small model, with strands loop height around 5.5 cm . Check the large (…
Zip Tie (Riot) Handcuffs - Adaptor for 0.35 inch thick Zip Ties Head of the zip tie goes through the big holes on the sides and the other end of the zip tie goes through the smaller holes through the head of the zip tie. Pull rind has…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Version updated! Now it´s version 1.1. The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
This is a pair of realistic Handcuffs I designed off of a picture I found on the internet. They feature a button activated double lock. After activating the double lock turn the key in one direction to unlock the lock then the other…
I lost the keys to these toy handcuffs years ago. I don't actually need them anymore but if someone else gets them in the future, I wanted to be able to give them away with keys. I designed them to look similar to the old ones (from what…
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
designed to be printed in mostly TPU for actor saftey (and ease of breaking or coming apart if accidents happen print 2 copies the only piece metal is the spring. the chain can be extended and added links to . and printed in place if…
Naughty fingers pinching a few too many Christmas cookies? Put a stop to that with these print-in-place fingercuffs. Just slip them over the first or second knuckle and squeeze the ratchet shut. They are sized for about 18mm dia. fingers,…
Esposas para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.
Did you lose those spare keys for your cheap handcuffs? Of course, you did they're tiny. Don't throw them away though, just print these.
These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…
This is a easily printable model that is well functioning and lots of fun. If your key breaks or gets lost you can make another or, if in need of a faster solution, use something like a bent paper clip to push the lever inside of the…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
Version 2 is live! Please give it a look as it is much safer! NOT A TOY, DO NOT USE ALONE Hardware required: M3 x 16 bolt + nut Circumferences: S = 15.5 cm M = 17.7 cm L = 20.4 cm Parametric Design, F3D file included if you'd like to make…
You need a rope (d max 1cm) to fit two of them together (at 100%). I got the best result printings them standing (see the black one). Printing them flat (see the red one) i had a lot of “problems” with support and my filament. I also used…
I recommend putting supports on some pieces of chains, if it doesn't take up supports don't put them, but I do it because I'm a beginner.
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
This model is compatible with the lego system.
This model is compatible with the lego system.
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
It is connected with pins and clips. The pins click into each other. I printed the handcuffs from PLA, the fasteners and the key is better from PETG and cuffs from PLA. Print 4 pcs of pins, 3 pcs of clutches.
How to build: Print as many links as you want. (≅5-20) Print 2 of everything else. Click the links together to make a chain. Put a cuff P1 and cuff P2 on a hingeamajig P1, then glue a hingeamajig P2 on top. Repeat step 3. Snap the…
No support needed Parts required : 1x M4 heat insert 1x M3 heat insert 1x M4x40 screw 1x M3x20 screw
NOT A TOY, BUT YOU COULD USE IT ALONE Update - 2026 Jan 3: Another neat latch idea has come from the mind of Stanislav Atanasov . The full latch and locking arm are printed at once with supports. Check it out! Update - 2025 Sept 17:…
Small handcuff for dummy 13. Remove the hands. pass one of the hand connectors though the middle at a time, reattach the hands. Will flex a little during instalation, this is on purpose.
