1 / 4
Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release — zdjęcie 1
1 / 4

Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
186
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release

A simple child safety lock for doors designed as a print-in-place mechanism. It prevents kids from opening doors, while adults can release it either with a magnetic key or a manual lever (depending on the version you print). Great for cabinets/doors where you want a clean look without complicated hardware.

Versions

  • Magnetic release version – unlocks using a small magnet “key”

  • Manual lever version – unlocks by pressing/pulling the built-in lever

Key Features

  • Print-in-place (no assembly for the mechanism)

  • Two unlocking options (magnetic or manual)

  • Compact, practical design for everyday use

  • Easy to mount (use your preferred method: screws / strong double-sided tape / adhesive—depending on your door and surface)

Hardware (Magnetic Version)

  • 1× magnet 3×8 mm

    • Glue the magnet in place using cyanoacrylate (super glue).

Printing Recommendations

  • Material: PLA / PETG (PETG recommended for durability)

  • Layer height: 0.2 mm

  • Perimeters: 2–3

  • Infill: 15–30%

  • Supports: not required (designed for print-in-place)

  • After printing, gently flex/move the mechanism to free it if needed.

Safety Note

This is a DIY safety aid and should be used with common sense. Always test the lock thoroughly on your specific door before relying on it.

Tagi