Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Standard Digital File License
Child Safety Door Lock (Print-in-Place) – Magnetic or Manual Release
A simple child safety lock for doors designed as a print-in-place mechanism. It prevents kids from opening doors, while adults can release it either with a magnetic key or a manual lever (depending on the version you print). Great for cabinets/doors where you want a clean look without complicated hardware.
Versions
Magnetic release version – unlocks using a small magnet “key”
Manual lever version – unlocks by pressing/pulling the built-in lever
Key Features
Print-in-place (no assembly for the mechanism)
Two unlocking options (magnetic or manual)
Compact, practical design for everyday use
Easy to mount (use your preferred method: screws / strong double-sided tape / adhesive—depending on your door and surface)
Hardware (Magnetic Version)
1× magnet 3×8 mm
Glue the magnet in place using cyanoacrylate (super glue).
Printing Recommendations
Material: PLA / PETG (PETG recommended for durability)
Layer height: 0.2 mm
Perimeters: 2–3
Infill: 15–30%
Supports: not required (designed for print-in-place)
After printing, gently flex/move the mechanism to free it if needed.
Safety Note
This is a DIY safety aid and should be used with common sense. Always test the lock thoroughly on your specific door before relying on it.
