Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based)
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 506
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Standard Digital File License
Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based)
A complex modular monitor stand with 4 drawers, designed to keep your desk clean and organized. The stand is built from multiple parts that connect together using printed connectors, so it’s easy to assemble, transport, or even expand.
The parts lock together with connectors, and glue is optional — you can glue everything for a permanent build, but it’s not required.
Features
4 drawers for cables, adapters, tools, stationery, etc.
Modular / expandable design (connect multiple modules if you want)
Connector-based assembly (printed connectors)
No glue required (optional if you want extra rigidity)
Designed by me from scratch and printed/tested in real use
Assembly
Print all main parts + the required connectors.
Slide/press the connectors into the prepared slots.
Insert the drawers.
Optional: add a drop of cyanoacrylate (super glue) on the connectors for a permanent assembly.
Print Recommendations
Material: PLA / PETG (PETG if you want extra toughness)
Layer height: 0.2 mm
Perimeters: 2–3 (3 recommended for the stand body)
Infill: 15–25% (more if you use a heavy monitor)
Supports: only if needed (depends on your part orientation)
Notes
If your connector fit is too tight/loose, adjust XY compensation or flow slightly — general tolerances are typically already built into the model.
