1 / 2
Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based) — image 1
1 / 2

Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based)

Rating
5 / 5
Likes
14
Downloads
119
Makes
1
Views
506
Reviews
1

Updated at source:

Model information

Category
Computers
License
Standard Digital File License

Modular Monitor Stand with 4 Drawers (Expandable, Connector-Based)

A complex modular monitor stand with 4 drawers, designed to keep your desk clean and organized. The stand is built from multiple parts that connect together using printed connectors, so it’s easy to assemble, transport, or even expand.

The parts lock together with connectors, and glue is optional — you can glue everything for a permanent build, but it’s not required.

Features

  • 4 drawers for cables, adapters, tools, stationery, etc.

  • Modular / expandable design (connect multiple modules if you want)

  • Connector-based assembly (printed connectors)

  • No glue required (optional if you want extra rigidity)

  • Designed by me from scratch and printed/tested in real use

Assembly

  1. Print all main parts + the required connectors.

  2. Slide/press the connectors into the prepared slots.

  3. Insert the drawers.

  4. Optional: add a drop of cyanoacrylate (super glue) on the connectors for a permanent assembly.

Print Recommendations

  • Material: PLA / PETG (PETG if you want extra toughness)

  • Layer height: 0.2 mm

  • Perimeters: 2–3 (3 recommended for the stand body)

  • Infill: 15–25% (more if you use a heavy monitor)

  • Supports: only if needed (depends on your part orientation)

Notes

If your connector fit is too tight/loose, adjust XY compensation or flow slightly — general tolerances are typically already built into the model.

Tags