Mid Century modern coat hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this off of a reel I saw on instagram.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
I saw this on instagram and couldn't be bothered to find it. so I just made one!
There is one component that does not have a posted 3d model. component Is the main shaft that the hanger slides on which is just a 13mm rod or tube that is 180 or so mm long.
The coat hanger themselves also have to be made from metal but are pretty simple to so with a file and a drill. The stl is supplied to give an idea as to how they need to look.
most of the parts were printed in gold pla and the ball ends were printed in mate black pla.
to hold the sticks onto the slider I fed copper wire through the hole that wraps around it.
her is the metal stock I used for the project: