1 / 1
VCORE 3.x BRS-Shelves with CPAP silencer for L3ver M1 — zdjęcie 1

VCORE 3.x BRS-Shelves with CPAP silencer for L3ver M1

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Plates L3VER M1 with CPAP silencer integration

Ocena
0 / 5
Polubienia
3
Pobrania
10
Wydruki
0
Wyświetlenia
130
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Fit any VCORE 3.0 or 3.1 with the Last L3ver M1 belt tensionner

The installation is quite straightforward

You can contact me at [email protected]  if you encounter difficulties

You will need:

-M3x8mm countersunk

-M3 inserts

-M3 3030 hammer nuts

Add rear plates to any Vcore 3.x equipped with the the BRS-L3ver M1, with the CPAP Silencer from Dan

Tagi