LayersFactory
Zgłoś model
1 / 1
Laptop stand — zdjęcie 1

Laptop stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

Sleek Minimalist Laptop Stand - Structural Leg

Elevate your workspace with this ergonomic, high-strength laptop stand component. Designed specifically for 3D printing, this leg combines a modern aesthetic with rock-solid stability to keep your laptop at the perfect viewing angle while improving airflow.

Key Features

  • Optimized Geometry: The "J-hook" design features a secure front lip to prevent your laptop from sliding, even at steep angles.

  • Reinforced Durability: Engineered to be printed on its side. This orientation ensures the filament layers run the length of the arm, providing maximum structural integrity against snapping.

  • Filleted Edges: Smooth, rounded borders throughout the design prevent scratches on your device and offer a premium, "molded" look.

  • Enhanced Stability: The widened rear base provides a large contact surface for the desk, reducing wobbling during heavy typing.

Technical Print Settings

To get the best results and ensure the stand can support the weight of a 13" to 16" laptop, I recommend the following:

  • Orientation: Print flat on its side (as shown in the preview image).

  • Material: PETG is highly recommended for its heat resistance (laptops get warm!), but PLA also works for lighter setups.

  • Wall Loops: 3 to 4 walls for extra stiffness.

  • Infill: 15–25% (Gyroid or Grid recommended).

  • Supports: Minimal or none required depending on your printer's bridging capabilities.

Assembly Note

This part is designed to be used in a pair. Simply print two of these (or mirror one in your slicer for a symmetrical look) to create a full support system.