FPV Drone 4 inch short range Open HD Raspberry Pi Companion Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for a 20x20 mini stack, a small 4s battery and 12x12 motors. Works with 3" or 4" props and 550mah 4s lipo.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Public Domain
You can print in PLA or PETG. PETG will pass more vibrations, but resist crashes better.
You will need some screws:
m3:
4 x 40mm
9 x 5mm
4 x 10mm
m2:
4 x 30mm (for FC)
16 x 5mm (motors)
4x 3mm (camera)
This drone is designed for use with OpenHD-type video transmission system. It houses a Raspberry Pi Zero W and a WiFi transmitter. If you go with a normal analog video, your life will be 100 times easier.
I think I grossly overestimated my vibrations and added too much bulk. If you feel like working on this, I can send you original blender files. You could probably cut the weight by 30-40%. But I'm tired, boss.