Geared Bipolar Stepper Motor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting block for 3V, 1.6A, 233 oz-in Geared Bipolar Stepper Motor with attached integrated Planetary gearbox with a…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Mounting block for 3V, 1.6A, 233 oz-in Geared Bipolar Stepper Motor with attached integrated Planetary gearbox with a 52/11 :1 ratio.
Instructions
Printed in ABS with 0.2mm layers. I had to clean out the bolt holes. Used 3mm flat head screws to attach the mounting block to the planetary gear and then threaded the holes in the corners with #6-32 hex head bolts for mounting to a bracket for my 3D printer.
I added a shorter design with mounting hole recesses for pan head screws instead of the machine head screws on the original.
Category: 3D Printer Parts