Geared Bipolar Stepper Motor Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting block for 3V, 1.6A, 233 oz-in Geared Bipolar Stepper Motor with attached integrated Planetary gearbox with a…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Mounting block for 3V, 1.6A, 233 oz-in Geared Bipolar Stepper Motor with attached integrated Planetary gearbox with a 52/11 :1 ratio.
Instructions
Printed in ABS with 0.2mm layers. I had to clean out the bolt holes. Used 3mm flat head screws to attach the mounting block to the planetary gear and then threaded the holes in the corners with #6-32 hex head bolts for mounting to a bracket for my 3D printer.
I added a shorter design with mounting hole recesses for pan head screws instead of the machine head screws on the original.
Category: 3D Printer Parts