1 / 6
Floss Bobbin Drill Winder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Winder for our floss bobbin that can be chucked into a drill for easier spooling. Please note, this is only designed for our bobbin, compatibility with other bobbins is not guaranteed or expected.
As always, be careful when using power tools. Use the lowest clutch setting and keep your hands away from the winder when spinning.
Features
3/8" hex to chuck into a drill.
Integrated locking slider to hold the floss bobbin in place.
Printing Tips
Print lying flat on the bed.
No supports or brim.
40% gyroid infill.
0.20 mm layer height.
Use a structural profile for best quality.