Magnetic Ratchet Holders
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametrically modelled set of magnetic ratchet holders for your toolbox.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
Please enjoy this set of ratchet holders! They are designed to be a perfect fit for Wera Zyklop ratchets, but should work with a wide variety of ratchets. The magnets in the bottom work well to hold them in place in the draw of a toolbox. You could also forgo the magnets and stick them down using double sided tape or super glue. The fusion 3D file is attached along side the STL's if you need to modify them.
The inspiration for this set came from this product available on amazon: https://www.amazon.com/MagAttach-Ratchet-Organizer-Piece-Green/dp/B09T2HCBHV/ref=sr_1_8?sr=8-8
I used a mixture of 12mm and 18mm magnets as this was what was available from Bunnings in Australia. Links to the magnets i used:
https://www.bunnings.com.au/everhang-12mm-rare-earth-disc-magnet-6-pack_p3690099
https://www.bunnings.com.au/everhang-18mm-rare-earth-disc-magnet-3-pack_p3690100
2 x 12mm magnets per ratchet holder and 1 x 18mm per handle support. Conveniently the magnets linked came in a set of 3 and a set of 6. I simply pressed the magnets into the holes and they are secure, but a drop of superglue or epoxy will mean they never come out.
As far as print settings i printed on a Lulzbot Mini 1 using PETg. I just printed them on high speed settings with 25% infill and they are sturdy. You could always up the infill to 100% to make them tougher.
NB: The second picture is actually an older design before i made the edges square but i dont have any other clear photos