Universal Adapter for Mintion Air Filtration System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minition 3D Printer Air Filtration System adapter for QIDI Plus4 and other printers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minition 3D Printer Air Filtration System (https://www.amazon.com/dp/B0GF872KRJ?ref=ppx_yo2ov_dt_b_fed_asin_title) comes with BambuLab adapters. To connect it to other printers you need an adapter. I made this one for QIDI Plus4, but it is universal enough to fit many others too.
Print with Tree/Auto supports and with orientation shown on the picture. I printed with QIDI PET-CF and 0.6 nozzle. Note: make sure the PET-CF filament is dry- it affects the print quality a lot. If you use a different material, make sure it can handle the heat from the exhaust fan. I also recommend using Carbon or Glass Fiber filament to make sure the dimensions are stable.
There are no mounts available on the printer wall, so I had to use a double-sided tape. Not all tapes stick well. My first attempt did not work. My second attempt was with Watec Double-Sided Heavy-Duty tape (https://www.amazon.com/dp/B0B2P69ZB3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1). So far it holds, but DISCLAIMER: I have not tested it for a sufficient time yet. On the other hand, since there are no mounts, it can likely fit many other printers.
The other advantage in compare to the original adapter that comes with the filtration system is that it steals the air on a side. This way the bulky hose is can be compactly placed on a side instead of requiring the printer to be far from the wall.