Qidi Q2 Chamber Exhaust Carbon Filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Active carbon filter for chamber exhaust
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 83
- Wydruki
- 1
- Wyświetlenia
- 925
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a carbon filter housing designed for the Qidi Q2 chamber exhaust fan. It helps to reduce odors and VOCs during printing by filtering the air exiting the chamber. Easy to install and compatible with standard activated carbon pellet.
Capacity: 600g activated carbon pellets
Filter mounting: 4x M3x16 screw
Lid Assembly: The lid is secured with an additional 2x M3x8 screws
At a bed temperature of 80°C and the chamber fan set to 30% with the filter installed, the chamber temperature is approximately 42°C at an ambient temperature of 22°C. I use it for PETG printing without any issues.
This design can also be used as a standalone air purifier unit. It fits any standard 80mm fan for general fume extractio.