caliper calibration fastening for centauri carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A calibration fastening for caliper for bed leveling.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A calibration fastening for caliper for bed leveling. All you need is one print and two M3 bolts to tighten the caliper. The hole size for caliper is 17mm width and 3.9mm thickness.
I printed it in the wrong way so I had to use it on the right side and due to that I removed some parts. The model below is for the left side so you don't have to do anything. Just unscrew the cover and then screw the mounting instead of it.
Settings:
2-3 walls
0.2 layer height
15-30 infill (grid recommended)
ALL Needed
print
2x M3 bolts to tight the caliper
Instructions
Just unscrew the cover and then screw the mounting instead of it, on the left side.