Unifi AP surface mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A surface mount for Unifi Access Point (AP)s. Includes a port for attaching 20mm conduit.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introduction
I needed a ceiling mount for a Unifi 6+ Access Point (AP) that I could connect 20mm conduit to neatly. I couldn't find anything online, so I designed this simple mount.
Highlights
Fits most modern Ubiquiti Unifi APs - the ones that are 160mm in diameter.
Port on the side to accept these 20mm conduit adapters.
The bracket supplied with the AP attaches to the mount using M3 heat inserts and M3 countersunk-head machine screws.
A small hole is provided in the mount to allow to you poke a tool in to release the AP from the bracket.
I used Sunlu PLA+ and 0.2mm layer height.
Model
Fusion 360 model file is included in case you need to tweak.