1 / 2
This is just a 3MF file of the original model configured for easier printing — zdjęcie 1
1 / 2

This is just a 3MF file of the original model configured for easier printing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a 3MF file with multiple plates, correct orientation, and settings for the Standing Desk Cable Chain by @chmurli

Ocena
0 / 5
Polubienia
0
Pobrania
17
Wydruki
0
Wyświetlenia
71
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

This remix is just a 3mf version of the original, with multiple plates and some configurations in place for better/easier printing. Notably:

  • Multiple plates. The first plate has six parts, the second 10 clips, and the third one the top and bottom mounts.

  • Infill left to the default 15% as recommended by the original author.

  • The “plates” (cable chain part 1) have a support exclusion geometry added so the slicer won't try to add supports to the small clip slits (they're very hard to remove and not necessary.)

  • The clips have overrides to print without a brim (unnecessary in my case, hard to remove) and with extra wall loops for a stronger part.

  • The clips print on their side. This makes the layer lines perpendicular to the expected tension on the part and eliminates the tendency of the clip edges to break.

Hope it helps someone out there.

Tagi