AP7 Integral Suppressor / Amplifier AAP01

Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available.

General

• The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the standard M14x1 CCW thread. Since printing threads is challenging, use a small nozzle and layer height no more than 0.1mm. Even then, tolerances may not be the same as on my printer, so first attempt to thread the locknut onto a metal barrel, not the plastic AAP01 barrel! Some force will likely be needed the first time, so work it until it becomes looser. Alternatively, if you have one, use a tap

• For mounting, either use a long 10mm Allen key, if you don't have one, a printable tool is provided

• Use high bed temperature since even very limited warping will cause the kit to sit visibly angled. Even then, some shimming or filing may be required

Suppressor

• Components: body, inlay, cap, locknut;optional: inlay, mounting tool

• Extra hardware: 1x M4x12 or shorter screw; 1x M4 threaded insert

• To achieve any suppression, either cut the inlay from foam or print it from TPU with 10-20% gyroid infill and zero walls (see picture). Even then, as per usual, the effect will be limited

Amplifier

• Components: body, locknut;optional: mounting tool

• The amplification is quite noticeable, although the sound profile is rather hollow

Feel free to write me a message or leave a comment if you have an issue or question