P
PrintablesSpecops
AIRSOFT- AAP01 USW
Remix of Vietnam Airsoft's AAP01 USW kit. Tolerances of the original kit were too tight to be printed. Credit goes to Vietnam Airsoft for the original kit
- Pobrania
- 267
- Polubienia
- 40
- Ocena
- 0
Wyniki wyszukiwania: aap01
Liczymy pasujące modele…
P
PrintablesamazingRoyce
AAP01 Micro Dot Mount
Action Army AAP01 Micro Dot Mount Distance Between Holes = 19 mm Hardware needed: Original Screws Of AAP01 And Micro Dot
- Pobrania
- 265
- Polubienia
- 24
- Ocena
- 0
P
Printables
aap01/aap01c side charging handle
This remix makes your normal aap01 charging handle extended to the side about 4 inches for personal customization. (NEEDS SUPPORTS) printed at .12 layer height and 100% infill. Please leave a make or a comment, thanks.
P
Printables
AIRSOFT- AAP01 USW
Remix of Vietnam Airsoft's AAP01 USW kit. Tolerances of the original kit were too tight to be printed. Credit goes to Vietnam Airsoft for the original kit
P
Printables
AP7 Integral Suppressor / Amplifier AAP01
Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available. General The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the…
P
Printables
AIRSOFT- Halo M392 gbbr kit for AAP01
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…
P
Printables
AAP01 Magwell
Action Army AAP01 Magwell Hardware needed: 1 x M3 x 12 Flat Head Hex Screw 1 x M3 Nut
P
Printables
AAP01 Extended Mag Release
Action Army AAP01 Extended Mag Release Hardware needed: 1 x M3 x 8 Flat Head Hex Screw
P
Printables
AAP01 Cocking Handle
Action Army AAP01 Cocking Handle Hardware needed: 2 x M3 x 8 Flat Head Hex Screw
P
Printables
H-key for aap01
This to simply as possible mode for yours aap01 pistol to use a little heavier bbs. Default hop-up rounds good only <0.3g bbs, but with this thing its rounds good 0.25-0.36g bbs. If you need to use more heavyer bbs then you should take…
P
Printables
glock/aap01 adapter
Tisknout z PETG, vrstva 0,2 mm Potřebné součástky: 1x pružinka z propisky (zkrácená) nebo jiná pružinka délky přibližně 10 mm 1x čep 2×22 mm Printed from PETG, 0.2 mm layers Parts needed: 1x spring from a pen (shortened) or another spring…
P
Printables
AAP01 Hair Trigger
A redrawing from a photograph of a short-throw trigger. The main printing challenge lies in the blind recess in the center—it is best printed on supports made of special material, both the body and the separating layer as a whole.…
P
Printables
aap01 lower fps nozzle value
1 mm garantee lower than 350fps at temp 30c more number value = smaller hole still in experiment 0.4 mm 358.6 fps 28c 1 mm 335 fps 28c
P
Printables
adjustable fps value nozzle for aap01 (npas)
minimum lenght 12mm Flat Head M2x12mm you need to disassemble nozzle to adjust fps lol
P
Printables
AAP01 smg like M4 hpa adaptor
As simple as possible hpa adaptor. Common parts and guide how to prepare magazine here https://www.printables.com/model/1239125-common-parts-for-glock-hpa This is hpa adaptor to using with m4 magazines like default smg. Tested with cyma…
P
Printables
Aap01 like smg mp5 hpa adaptor
As simple as possible hpa adaptor. Common parts and guide how to prepare magazine here https://www.printables.com/model/1239125-common-parts-for-glock-hpa This is hpa adaptor to using with m4 magazines like default smg. In addition to the…
P
Printables
Cyberpunk Lexington Airsoft AAP01
Make working Lexington automatic pistol from Cyberpunk 2077 out of Action Army AAP01! This print replaces original upper receiver and outer barrel and reuses most of the screws. Might require little bit of sanding but in my case was not…
P
Printables
AAP01 like default outer barrels
This is models for many common inner barrel sizes. In addition to the standard round barrel options, options with a lower and upper bar are made. And also add option to use this outerr barrel with top ris and my TDC hop up module…
P
Printables
aap01/aap01c side charging handle
This remix makes your normal aap01 charging handle extended to the side about 4 inches for personal customization. (NEEDS SUPPORTS) printed at .12 layer height and 100% infill. Please leave a make or a comment, thanks.
P
Printables
AAP01 Top Rail | JACKED ARMS
Upgrade your Action Army AAP-01 with this lightweight, 3D-printed top rail. Designed for a secure fit and easy installation, it allows you to mount optics with ease. Durable, functional, and perfect for custom builds. JACKED ARMS The…
P
Printables
Airsoft AAP01 Upper assembly
File from GrabCad converted to STL and cleaned up: https://grabcad.com/library/aap01-upper-assembly-1 AAP01 upper parts: - Upper - Threaded External Barrel with protection cap - Rear and Front sight AAP01 bolt and nozzle parts: - BlowBack…
P
Printables
AAP01 Grip Panel for ctm tac FUKU2 Nylon Frame
print with support, it's mainly for the hanging part for screw hole. or not, if you find it hard to remove, or you have unique understanding on slicers
P
Printables
custom AAP01 RIS bridge riser
printed material PETG , 40% infill held on rail bz 2 M4x20 screws and standart M4 nuts
P
Printables
AP7 Integral Suppressor / Amplifier AAP01
Bodykit designed for the CTM AP7 kit on the AAP01 platform. Both a version designed for sound suppression and amplification are available. General The kit mounts via a locknut that is screwed onto the stock AAP01 barrel. This uses the…
P
Printables
AAP01 G17 lower
I spliced this together from two free models. Credit to Vietnam airsoft and @arm00700th for the STLs used. Does not work with default AAP mag release so you will need to print a glock style one such as this one…
P
Printables
AAP01 mag lips for APS 50 round magazine
This model is a solution for a very narrow and specific problem. My APS magazine was working inconsistently in my AAP01. Made one that's better. Tested during a 6h game in 0-5°C. Works. If you're here to convert your APS magazine to work…
P
Printables
AIRSOFT- Halo M6C Socom kit for AAP01
M6C Socom conversion kit for AAP01 pistols based on the suppressed magnum from Halo ODST. I made this kit specifically because I had one single issue with the other M6C kits on the market- they require too many extra nuts and screws to…
P
Printables
AIRSOFT- Halo M7S gbbr kit for AAP01
World's first true gbb Halo M7S smg. Finding an airsoft M7S is basically impossible if you're not interested in AEGs. So I did it myself. This project used an AAP01 as a base platform, but this is not merely a shell. This project takes…
P
Printables
AIRSOFT- Halo M392 gbbr kit for AAP01
Mix Halo Reach, airsoft, 3D printing and GBBs, and you get the M392 DMR as a GBBR. This conversion kit brings a 1:1 scale Halo Reach DMR into airsoft. Now you're ready to defend Reach from the Covenant. This project used an AAP01 as a…
P
Printables
AAP01 Thumb Rest - right side
This is remix of model made by amazingRoyce All I did Is that I mirrored this model so It fits on right side of your aap-01. Everything else is original by the author. It took me 1 minute to do. Made for left hand users :) I can recommend…
P
Printables
AIRSOFT- Halo MA40 gbbr kit for AAP01
World's first true gbb Halo MA40 AR? Finding an airsoft MA40 is basically impossible unless you pay a lot for the Nerf MA40 and modify it. I decided a printable MA40 was needed. This project moves the internals from an AAP01 over to a…
P
Printables
AAP01 Frontend Hammerhead with tracer unit
Remixed model of Hammerhead for AAP01 to fit tracer Unit Changes: - Slightly bigger - Space for tracer unit (Acetech Brighter C or any below 28mm diameter) - 14 CCW inside for tracer - Removed bottom rail (added version with this rail) -…
P
Printables
Action Army AAP01 (airsoft) retractable stock
This is a remix from https://www.thingiverse.com/thing:4660187 base model to be able to support a retractable stock. I cannot find a free stock model for app-01 that is retractable that I like. So, I remix from a model that I like to fit…
P
Printables
canon custom aap01 91mm
c' est un canon externe compatible accessoir picatini inferieur type glock
P
Printables
AAP01 holster for TTI trigger
This is a Holster for AAP-01 with TTI trigger setup. Hardware required: 2 M3x10 screws 4 M3x8 screws 4 M3 nuts 1 6mm diameter spring Note: This holster will work only if your trigger is set to a very short pull. Print Settings Supports:…
P
Printables
Fondina AAP01C
Fondina slim con aggancio e blocco solo sul ponticello, permette di non avere giochi e spostamenti della replica durante le varie operazioni di spostamento dell'operatore.
P
Printables
AAP01 Magwell
Action Army AAP01 Magwell Hardware needed: 1 x M3 x 12 Flat Head Hex Screw 1 x M3 Nut
P
Printables
AAP01 Extended Mag Release
Action Army AAP01 Extended Mag Release Hardware needed: 1 x M3 x 8 Flat Head Hex Screw
P
Printables
AAP01 Cocking Handle
Action Army AAP01 Cocking Handle Hardware needed: 2 x M3 x 8 Flat Head Hex Screw
P
Printables
AAP01 Thumb Rest
Action Army AAP01 Thumb Rest Hardware needed: 1 x M3 x 12 Flat Head Hex Screw To mount the Thumb Rest, the mounting pin of the trigger must be pushed in slightly from the right side of the firing direction, so that the pin on the left…
P
Printables
Action Army AAP01 Short Barrel Adapter
Action Army AAP01 Short Barrel Adapter Hardware needed: Original AAP01 Screws
P
Printables
AAP01 under rail
This rail fits tightly to another rail if, for example, you have not enough place to insert your accessories. See the photos. I printed it with 100% infill to make it tough and it works well.
P
Printables
AAP01 Knob Charging Handle
A Knob for people who hates having it get caught in folliage while in holster.