IKEA ALEX Hidden Secret Drawer/Shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hidden drawer that fits on the bottom of an IKEA ALEX drawer.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 445
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This secret drawer fits under any of the drawers of an IKEA ALEX unit. It's almost invisible, even if the ALEX drawer is fully pulled out. The secret drawer slides in place using two 3D-printed rails. It's held in place by two spring-loaded pins to prevent the drawer from sliding out when the ALEX drawer is moved rapidly.
The only additional hardware needed amounts to superglue and 4 small wood screws.
Print Instructions
For one single drawer, the following models need to be printed:
1x IKEA Alex Secret Drawer - Drawer right.stl
1x IKEA Alex Secret Drawer - Drawer left.stl
1x IKEA Alex Secret Drawer - Connector.stl
2x IKEA Alex Secret Drawer - Rail.stl
I used the following printer settings:
Printed in PLA, but any rigid filament should do
2 wall loops
15% gyroid infill
No support needed when printing the .stl files in the given orientation
Bridging settings for the connector piece:
10 mm/s bridge speed
1.5 bridge flow ratio
45° bridge infill direction to minimize overall bridge distance
Assembly
The two rails must be screwed (or glued) in place to the very back of the underside of the ALEX drawer. The drawer itself is assembled by sliding both halves of the drawer into the connector piece. I used some additional drops of superglue here to prevent the drawer from coming apart in the future. Finally, the drawer simply needs to be inserted into the rails.