Square 39mm screw lens hood for 35mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Square lens hood that screws into 39mm filter threads. Includes a locking ring to orient it correctly.
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 290
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a square lens hood made for 39mm filter thread, designed for roughly the field of view of a 35mm f/2 lens whose front element fits inside of 39mm filter threads. This was developed specifically for the Voigtlander 35mm f/2 Ultron lens for Leica M mount.
It includes a knurled locking ring that should allow you to orientate the hood correctly and then tighten the ring down onto the lens to keep it there.
It should be printable without supports by orientating it on the print bed so that the bottom most layer is the front of the lens hood, so it prints from the square end back to the screw mount.