1 / 7
S1 Pro CR10 SE FIXED holes & No supports - Lower Stiffener + CAD FILES! — zdjęcie 1
1 / 7

S1 Pro CR10 SE FIXED holes & No supports - Lower Stiffener + CAD FILES!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The lower part of TiGi123 Stiffener mod but fixed the tight holes & made the CAD for everyone to adjust

Ocena
0 / 5
Polubienia
3
Pobrania
15
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

As per TiGi123 description really. 

Print with around 3 walls, 15% gyroid infill and should be good to go!

Images below of print orientation 

Tagi