23 modeli
Use this test tower to test for Z banding/wobble. This print aims to be simple, as quick to print as possible and and use minimal filament. Recommended print settings: 0% infill 0 top layers Z seam at rear If this model is too tall…
This edge banding trimmer is a lifetime tool that works pretty well. The tool make a perfect trim in seconds, is Very stable, especially on starting. You can reverse the blade when dulled. The trimmer allows up to 4mm thick banding. The…
A simple test cylinder, good print to show how consistent or not your Z-axis is. the Base is 2mm thick so you can measure if your z-offset is correct. The cylinder is 100mm so you can measure for your Z-axis e-steps. Base is 40mm x 40mm…
I like the idea of JMAW's Edge Banding Trimmer . Unfortunately it did not work that well for me. I wanted a model, where the blade can be fixed directly to the model using some screws and nuts, instead of having a clamp. Because in the…
Watch the accompanying video: Join me on Patreon (behind the scenes content & 3D models): https://patreon.com/user?u=80746241 Buy me a coffee/beer: https://ko-fi.com/ygk3d Instructions for Testing: For 5 tool machines : 1. Print…
Print with 30% infill, 0.1 layer height, 4 walls and 8 top layers. Sand mating surfaces of the middle part with 80 and then 200 grit. The top and bottom parts should print smooth enough to make sanding unnecessary. They should be able to…
This is an attachment for the Makita trim router for edge band trimming. It is designed to use with a 0.5" bit. The mounting plate allows for micro-adjustments to allow for a perfect trim. I use a bullnose router bit to avoid an edge…
Clip for edge rolls of the edge banding machine in the joinery. For edge rolls up to 26 mm thick. # Clip für die Kantenrollen der Kantenmaschiene in der Schreinerei. Für Kantenrollen bis 26 mm Stärke. Print Settings Resolution: 0,2…
If after installing my “ Z-Axis Stepper Motor Mount with integrated Axial Thrust bearing ” mod, you still have Z banding on your E3, this should fix any remaining issues. These mounts allow the correct vertical motion to be obtained while…
A basic model to test your printer for: Z wobble/banding, ringing after corners, pressure advance, seam and VFA. It also have indicator every 10 mm. Chose a size or take the biggest one and use the cut feature in your slicer to cut it at…
150mm banding wheel. Requires 1 bearing (25mm internal diameter x 52mm outside diameter x 15mm thick)
Bands are horizontal lines that bulge outward from 3D prints. If you notice them in this print, I would suggest PID tuning the nozzle and bed and making sure that the screws and belts are tight on your printer.
Hi, It seems that I got lead screw that it not 100% perfect and I was experienced errors in prints related to Z wobble that Official TR8*4 Anti-Backlash Nut Block could not solve. After tightening official Anti-Backlash Nut Block issue…
simple rounded tower to test z axis.
Hand Stretch Wrap Film Banding Roll sleeve helper
Simple addon for Wolfcraft FZ40 Spring Clamp to convert it into Edge Banding Clamp. Printing is done in PETG with 0.20mm height and 0.6mm nozzle. Beside 3D printed parts 4 M3x10 screws are needed and 4 M3 bolts. Also you need rubber strap…
My approach to absorb the wobbling of my lead screws at my CubeAnet8 https://www.thingiverse.com/thing:4804870 using the very basic Anet A8 lead screw, I came up with this design. I now created a generic version and included the FreeCAD…
These height adapters are designed for the Ender 3 V3 SE to provide proper clearance when installing Oldham-style Z-axis couplers. The models are not symmetrical — the left and right sides of the printer (as viewed from the back) require…
This is a wall mount for the Shimpo BW-22LC banding wheel and any others which share the same base dimensions. I recommend 4 walls and 30% or higher infill for good stiffness and strength. Recommended print orientation is vertically as in…
i made this oldham with a lot of modifications from other options online, first thing i did was designing the space for m3 inserts as i think it's better than nuts, second thing was making the middle hole bigger, so the movement that the…
