Snapmaker U1 top cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The top cover of the SNAPMAKER U1 printer. The design has quite a few flaws, but it should be usable.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 2420
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my design for the SNAPMAKER U1 top cover. It was created so that it could be printed on this printer. Some elements require supports (top element), others theoretically do not, but for stability I had to add them anyway. The cover is quite light and delicate, but it should easily withstand normal use. The front door opens upwards. The hinges should theoretically hold, but the polycarbonate glass is large and relatively heavy.
The design consists of:
- 4 legs/feet
- bottom - 4 parts joined and glued
- back - 2 parts joined and glued
- side columns - each joined and glued from 2 parts
- hinges
- handle
- side and front walls made of 3mm polycarbonate
You will need:
- some M3 threaded inserts
- some M3 screws (probably two types)
- adhesive (e.g., epoxy)
I will only share elements for the left side. Both sides are symmetrical.