Prusa Commercial BTS: Diffusion Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modular 3D printed diffusion panel designed to shape and soften light for product filming and timelapse work
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 247
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a modular 3D printed diffusion panel designed to shape and soften light for product filming and timelapse work from the Prusa Core One Commercial BTS
Instead of using traditional fabric diffusion, this panel relies on exposed infill as the light-modifying surface. By setting top layers to zero in the slicer, the infill pattern becomes visible and acts as a structured diffusion grid.
By adjusting infill type and density, you can control:
• Light softness
• Transmission level
• Directional scatter
• Texture of the diffusion
This design was used in my Prusa Core One commercial BTS to create consistent, repeatable lighting for motion-controlled timelapses.
Recommended Settings
Material: PLA (white or natural works best)
Layer height: 0.2mm
Top layers: 0
Bottom layers: 3–4
Infill: 15–25% (Gyroid or Grid recommended)
Infill pattern: Experiment for different diffusion characteristics
For stronger diffusion, increase infill density.
For brighter output, reduce infill percentage.
Use Case
Clamp in front of a COB light or LED panel.
Works especially well for:
• Small product lighting
• Timelapse scenes
• Controlled studio setups
• Custom soft-light shaping