Weighted Paint Brush Caddy with Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weighted and non weighted versions available
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Features
Weighted - if you choose that option. There is an internal cavity designed to hold 12 1/4 oz wheel weights. See links below for purchase.
Offset Heights - The back holder is 2mm higher than the one close to the drip tray. Depending on the slope of the brush handle, this should keep them pointing ever so slightly downhill, allowing water, pain, cleaner, or whatever to drip off the end and not flow back into the barrel which can shorten the life of your brushes
Large drip try - for a variety of brush lengths
Printing Instructions (if using the weights)
PRO TIP: If you place the weights face down on the print bed (in a place where they will not collide with the print head), they will be closer to your print's temperature when the layer prints on top of them. This seems to have better results. I waited until after the nozzle wipe while it was printing the brim and put them on the front of the print bed. I added some binder clips to keep them from falling off the bed.
Slice the model
Bring the layer slider down until just before the "roof" of the internal cavity prints
Right-click the icon and select "Insert Custom Gcode"
Enter the Custom Gocde shown below
Once the print pauses, insert the weights as shown in the image below. There should be 3 columns of 4 weights. This allows for some wiggle room when placing. You printer should be able to bridge thr gaps between them.
Resume Printing
Custom Gcode
G1 X10.000 Y200.000 E0; move the printer bed forward
M1; pause
M105; continue
1/4 Oz Adhesive Wheel Weights
Amazon: https://www.amazon.com/dp/B0851J3T8V?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3