TPU Magnetic Pen Cup
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic pen cup with a TPU sheet on the magnetic interface, reducing slippage on slick magnetic surfaces.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Mostly copied from original project:
Magnetic cup for holding pens/pencils/tools/whatever else!
Printing Instructions
I printed the model w/ Prusament PLA and AmazonBasics TPU.
Print upright. No supports required. Don't add too much infill/weight, otherwise the weight of the model plus the weight of what you put in the cup will be greater than the force of the magnets and your cup will slide down. Default Prusa profiles should be sufficient.
Assembly Instructions
You'll need [Qty: 30] 6x2mm round magnets, and some quick-dry superglue (or similar). Quantity and size of magnets can be adjusted in the Autodesk Fusion360 user parameters or by modifying the STEP file.
Simply add some glue to the holes and press in the magnets firmly. Use a wooden tool or clamp to firmly seat the magnets. The magnets should fit perfectly flush into the holes with a small amount of force.