Ender 3 V2 PSU Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This PSU cover will allow for more air to cool the module and reduce the sounds produced by the previously blocked fan
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 252
- Wydruki
- 8
- Wyświetlenia
- 2403
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This print will allow for the PSU beneath the Ender 3 V2 to actually breathe. As stated in the Meanwell documentation sheet, the holes on the PSU are not to be covered by any means. So this print will do a great job of organizing the PCB wires and keeping the PSU fan off for a longer period of time. In turn, this will keep the Ender a lot quieter for those looking for a more silent printer. Check out this other print I made that goes well with this one when combined.
Print settings:
Layer Height = 0.2 mm
Infill = 100%
Perimeters = 3
Temperature = 235C hotend / 70C bed
This is not my design but from someone over at Thingiverse that I couldn't find here. This guide shows how to remove the existing metal cover. Hope you enjoy it.