LayersFactory
Zgłoś model
1 / 6
TPU AirSurfer String — zdjęcie 1
1 / 6

TPU AirSurfer String

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyWydruki i komentarzeRemiksyKolekcjePowiązane

This is a TPU string you can print for your AirSurfer, a toy that allows your fingers to surf on the air outside your car window. This design was made for the AirSurfer, AirSurfer Lite, and AirSurfer Lite Pro, but it could also work with the AirSurfer Hoverboard if you scale the string to be longer.

The string works well when printed with 90A TPU. 95A could probably also work pretty well. Also print with 100% infill.

Explore all of the AirSurfer deigns I have to offer here.

How to set up the string with the AirSurfer:

Refer to the gif at the end of the photo gallery of this post to help visualize each step.

*Long hole v. small hole ↴

Steps:

  1. Thread the long hole through the small one

  2. Thread the long hole through the top of the hole in the AirSurfer

  3. Now thread the loop—which was formed in Step 1—through the long hole

  4. Tighten, then you're done

Tagi

toywindowboardcarfidgetairtpuroadwindstringtriptrickfingersurfboardfingerboardfingerairboard