TPU AirSurfer String
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a TPU string you can print for your AirSurfer, a toy that allows your fingers to surf on the air outside your car window. This design was made for the AirSurfer, AirSurfer Lite, and AirSurfer Lite Pro, but it could also work with the AirSurfer Hoverboard if you scale the string to be longer.
The string works well when printed with 90A TPU. 95A could probably also work pretty well. Also print with 100% infill.
Explore all of the AirSurfer deigns I have to offer here.
How to set up the string with the AirSurfer:
Refer to the gif at the end of the photo gallery of this post to help visualize each step.
*Long hole v. small hole ↴
Steps:
Thread the long hole through the small one
Thread the long hole through the top of the hole in the AirSurfer
Now thread the loop—which was formed in Step 1—through the long hole
Tighten, then you're done