Keyboard Under Desk Holder Full Size Keyboards remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pretty much the same design as the original but an extended height to house any keyboard
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Edit : Updated model file to reflect 241mm depth
Extended the height of the holder to accommodate bigger keyboards like the mechanical metal chunkers. It's still slim enough where it won't look out of place. Most of the geometric flourish along the edges had to be changed to better line up every thing with the expansion so other than that, pretty much the same.
If you need a holder this big then odds are it's a bit on the weighty side so I recommend 3 wall minimum, and least 30% Gyroid infill.
Print orientation as is already in the file. It should be printing on its back pointing straight up. I've also included the f3d fusion file in case anyone wants to modify the modification.
I don't have a picture of it printed just yet as I'm currently committed to a 6 day long print for something else.
