Strap Coiler for Selve Roller Shutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement housing for Selve strap coiler with a distance between the mount screws of 155 mm.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Replacement housing for Selve strap coiler with a distance between the mount screws of 155 mm.
The original product is listed as 084801/084803/084805 (white), 084841/084841/084841 (brown), 084851/084853 (cream), 084861/084863 (anthracite).
Printed inside the original housing are the numbers 002360 and 002361 (see photo).
The model is parameterized and can be adapted for different strap lengths in the FreeCAD file:
The value Spool_diameter in the Params variable set can be adapted to match the expected diameter of the strap spool inside the housing. Scaling should be an iterative process to prevent the model from breaking. Steps of ± 2 mm should be safe. Note that the models will break for values lower than 83 mm.
When transferring the hub and/or changing the strap, take care not to hurt yourself.
Keep in mind that the hub contains a loaded spring. Hold the metal strip on the hub so that the spring will not unwind while moving the hub into a different housing.
If you like this design, please consider leaving a ♥heart. Thanks!
----------
Parts
The original hub of a Selve 002361 strap coiler
[6x] 3.0 mm screws
----------
Printing
Filament material: PETG
Resolution: 0.20 mm
Infill: 25 % Grid
Supports: No