Guitar Pick (longer jazz III); wear resistant; pro level solution
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for maximum tone and attack control with great wear resistant - PC only
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 167
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I altered curvatures of the old Dunlop JP ultex version of jazz III to make it more predictable on fast strumming (funky stuff; single coils like it a lot). Strokes inherit 90% of the original response (mechanical).
Print with pure PC or PC-blend.
Don't use CF (wearing due to friction).
Don't use nylon (it sounds awful and provides less control and response).
Don't scale for thickness - chamfers are profiled for 1.5mm with 0.15mm layer height...
Print with 0.15mm layer height.
Make sure to also change the slicer default 0.25mm of the first layer to 0.15mm. Not doing so will confuse your muscle memory, especially if you're used to pick slanting. Also, the wearing becomes irregular between top and bottom layers making it worse over time, so do yourself a favor.Set the First layer flow to 100% (default is >100%)
Print with 0.6mm nozzle; Printing with 0.4mm provides inconsistent edges with PC
If you only own 0.4 nozzle: Use two perimeters for all layers and increase speed for outer perimeters.The top layer is designed for right-handed picking to be in contact with thumb. -0.25f*PI RAD for monolithic lines on the top layers is what I found counterintuitively being the most consistent grip.
Seam position - rear
Make sure it's actually positioned so that you don't end up with seams on the attacking edge part of the pick. Placing seams ot the hand-outer rear side of the pick gives nice feedback on pick angle when changing grip during play, but I prefer it to not interfere, so I paint it on hand-inner rear side. You can give it a try.You can experiment with ironing on the top layer as it produces nicer finish (if sanding afterwards).
I use the Pusament PC-blend: the pick starts losing its attack response after ~5-7 gigs of pro level play (similar to ultex). After 12 years of using Dunlop picks I stopped thanks to this one. Also, their pricing is awful.